HIT-38 (SPEED MORTISER WITH 1" BIT) When on the job site use our HIT-38 Speed Mortiser to simplify mortise lock installations. The basic HIT-38 will prepare the required mortise cavity using a series of drilled plunge cuts followed... (read more...)
HIT-38MB1 (MORTISE BITS FOR HIT-38, 1") Mortise Bit for HIT-38 / 1" Diameter. Our drill bits are specially modified for mortising use. Don't get stuck on the job without them. Always carry spare bits whenever you're on the job. (read more...)
HIT-38MB2 (MORTISE BIT FOR HIT-38, 7/8" ) Mortise Bit for HIT-38, 7/8" Diameter. Our drill bits are specially modified for mortising use. Don't get stuck on the job without them. Always carry spare bits whenever you're on the job. (read more...)
HIT-38MB3 (MORTISE BIT FOR HIT-38, 3/4" ) Mortise Bit for HIT-38 / 3/4" Diameter. Our drill bits are specially modified for mortising use. Don't get stuck on the job without them. Always carry spare bits whenever you're on the job. (read more...)
HIT-44B17 (2 WING CARBIDE TIP BORING BIT) Our newest boring bit is a professional quality 1” diameter two wing carbide tipped bit. It was designed for use in our HIT-44 and HIT-50 drill guides and will work in other guides that will... (read more...)
HIT-44LM3 (LATCH MARKING TOOL) A first from Major Manufacturing, the only latch marking tool to offer the following features.. 1. Interchangeable pilots for both 7/8" and 1" diameter latch holes. 2. Adjustable blades for 1" and... (read more...)
Strike marking tool for 1 1/8" x 2 3/4" deadbolt and T-strikes. Features 7/8" and 1" interchangeable pilots. Blades may be removed to be sharpened or replace. Body... (read more...)
HIT-44SM7 (STRIKE MARKING TOOL) Strike marking tool for full lip strikes 2 1/4" tall. Features 7/8" and 1" interchangeable pilots. Blades may be removed to be sharpened or replaced. Body and handle machined from steel. P/N for... (read more...)
